Panasonic POVCAM AG-MDR25E Operating Instructions Manual Download

Page: 64 / 261

- 64 -

Select the compensation mode for the time code.

≥

Set [SYSTEM FREQ] to [59.94Hz]. (

)

Select the menu.

≥

This item will be set to [NDF] automatically in following cases:

When the frame rate in [REC FORMAT] is 23.98p (

213

)

≥

This item will be automatically set to [NDF] and will not be displayed as a menu item when [SYSTEM FREQ] is set
to [50.00Hz]. (

)

Sets the way the time code will move.

Select the menu.

* If the frame rate in [REC FORMAT] or is set to 23.98p, a slight time error may occur when switching to Playback

Mode. (

213

)

≥

It is automatically set to [FREE RUN] in following cases:

When PRE-REC is enabled (

215

)

≥

The time code will reset when the built-in lithium battery is exhausted when it is set to [FREE RUN].

You can set the initial time code.

Select the menu.

Touch the item to set and change with

≥

The display will be set to “00h00m00s00f” if you touch [Reset].

≥

“h” is an abbreviation for hour, “m” for minute, “s” for second and “f” for frame.

Touch [EXIT] to complete the setting.

≥

This unit will adjust the time code in accordance with the frame rate of the [REC FORMAT] (

213

). Therefore, it

may not be continuous from the previous final time code when the recording format is changed.

≥

Counting may not continue from the previous final time code when the Operation Mode is switched from SDI Mode
to CAM Mode.

≥

If the frame rate in [REC FORMAT] is set to 23.98p, set the number of frames to [00] or a multiple of 4. If you enter
a different value, time code will not be recorded correctly.

[DF MODE]

: [TC/UB SETUP]

[DF MODE]

desired setting

[DF]:

Time code is compensated in accordance with the actual time. It is mainly used for
broadcasting such as TV programs.

[NDF]:

It will not compensate the time code. (There will be a difference from the actual time)

[TCG]

: [TC/UB SETUP]

[TCG]

desired setting

[FREE RUN]

It will constantly move.

[REC RUN]:

It will move only when recording.

[TC PRESET]

: [TC/UB SETUP]

[TC PRESET]

ヮユワヶ

AG-MDR25PJ.EJ(DVQP1328ZA)_E.book 64 ページ２０１７年５月２２日　月曜日　午後６時１４分

Summary of Contents for POVCAM AG-MDR25E






































































































































































































































































Search results

Summary of Contents for POVCAM AG-MDR25E

Reviews:

Related manuals for POVCAM AG-MDR25E

Brands by name

Popular brands

Panasonic POVCAM AG-MDR25E, Operating Instructions Manual

Search results

Summary of Contents for POVCAM AG-MDR25E

Reviews:

Related manuals for POVCAM AG-MDR25E

Brands by name

Popular brands