Panasonic POVCAM AG-MDR25E, Operating Instructions Manual

Page: 71 / 261

- 71 -
≥ Register <SCENE FILE> to a USER button. ( l 66 )
You can save the scene file settings to the SD card or load them from the SD card to this unit.
∫ Saving scene file settings
1 Press USER button or touch USER button icon in the recording screen.
2 Touch [SAVE].
3 Touch the name of the scene file.
≥
All scene number settings ([AUTO], [F1:] to [F3:]) will be saved.
≥ Up to 8 files can be saved.
≥
If you have touched the name of the existing scene file, touch [YES] to overwrite it.
∫ Assigning saved scene files to scene numbers
1 Press USER button or touch USER button icon in the recording screen.
2 Touch [LOAD].
≥
When ([SELECT SCENE] is set to [AUTO])
Touch [YES] to load the settings of [AUTO].
3 Touch the name of the scene file you want to load.
4 Touch / to select the scene number to which you want to assign the scene file.
5 Touch [RETURN].
≥
When you touch [YES], Settings
*
of the scene number you have selected will be loaded and then assigned to the
corresponding scene number in [SELECT SCENE].
* The title of the scene number will also be loaded.
≥ If you select [ALL], settings of all scene numbers will be loaded.
≥
You can also access this function by selecting menu items.
[CARD FUNCTION]
#
[SCENE FILE]
#
[LOAD] or [SAVE]
≥
Register <PRE-REC> to a USER button. ( l 66 )
This allows the recording of an image and audio to start before you press the recording REC/PAUSE button.
AVCHD clips will record from approximately 3 seconds before, and MP4 clips will record from approximately
4 seconds before.
≥
[P-] is displayed on the screen. After you start recording, the display changes to [P-REC].
≥ Aim the unit at the subject beforehand.
≥
This cannot be set when [PRIORITY MODE] is set to [IP] or [IP(4K)].
≥ AVCHD clips may not record from 3 seconds before, or MP4 clips may not record from 4 seconds before in the
following cases.
j Immediately after the maximum PRE-REC standby time has elapsed
*
j
If the length of time from when PRE-REC is set to [ON] to when you start recording is too short
j If the length of time from when you display the recording screen by turning it off and on or pressing the MODE
button to when you start recording is too short since you set PRE-REC
j When the card slot to record the image was switched automatically by RELAY REC operating at the time the
recording was started (
l 43 )
* The maximum PRE-REC standby time is 3 hours. Once PRE-REC is activated, it is automatically deactivated and
then re-activated every 3 hours.
≥ Images displayed on the thumbnail in Playback Mode will differ from the motion pictures displayed at the start of
playback.
≥ PRE-REC is canceled when [AUTO REC INPUT] is set to anything other than [OFF]. ( l 82 )
<SCENE FILE>
<PRE-REC>
AG-MDR25PJ.EJ(DVQP1328ZA)_E.book 71 ページ ２０１７年５月２２日 月曜日 午後６時１４分