- 113 -
∫
Color temperature setting ([COLOR TEMP])
1
Press the [MENU] button on the AW-RP50.
≥
The [MENU] button lights, and the [PRESET MEMORY/MENU] buttons become selectable.
2
Press the [4 (AWB/ABB)] button in the [PRESET MEMORY/MENU] area.
≥
The button lights, and the AWB/ABB menu appears on the LCD panel.
3
Turn the [F1] dial to select “VAR”.
≥
Color temperature configuration is enabled when “VAR” is selected, and it is initially set to the color temperature
held on the camera.
To adjust the setting, proceed to the following.
4
Press the [8 (CAMERA)] button in the [PRESET MEMORY/MENU] area.
≥
The button lights, and the GROUP menu appears on the LCD panel.
5
Turn the [F1] dial to select “COLOR TEMP”, then press the [F1] dial.
≥
The color temperature appears on the bottom right (F2 area) of the LCD panel.
≥
Press the [EXIT] button if [COLOR TEMP] is not displayed.
6
Turn the [F2] dial to select the color temperature.
∫
Optical image stabilization function setting
1
Press the [MENU] button on the AW-RP50.
≥
The [MENU] button lights, and the [PRESET MEMORY/MENU] buttons become selectable.
2
Press the [9 (SETUP)] button in the [PRESET MEMORY/MENU] area.
≥
The button lights, and the [SETUP] menu appears on the LCD panel.
3
Turn the [F1] dial to select “FUNCTION”, then press the [F1] dial.
≥
Press the [EXIT] button if [FUNCTION] is not displayed.
4
Turn the [F1] dial to select “I.S.”, then press the [F1] dial.
≥
“Off” or “On” appears on the bottom right (F2 area) of the LCD panel.
5
Turn the [F2] dial to select “Off” or “On”, then press the [F2] dial.
∫
Digital extender ([D.EXTENDER]) function setting
1
Press the [MENU] button on the AW-RP50.
≥
The [MENU] button lights, and the [PRESET MEMORY/MENU] buttons become selectable.
2
Press the [9 (SETUP)] button in the [PRESET MEMORY/MENU] area.
≥
The button lights, and the [SETUP] menu appears on the LCD panel.
3
Turn the [F1] dial to select “FUNCTION”, then press the [F1] dial.
≥
Press the [EXIT] button if [FUNCTION] is not displayed.
4
Turn the [F1] dial to select “D. EXTENDER”.
≥
“Off” or “On” appears on the bottom right (F2 area) of the LCD panel.
5
Turn the [F2] dial to select “Off” or “On”, then press the [F2] dial.
[Off]:
Image stabilization function not used.
[On]:
Image stabilization function used.
[Off]:
D.Zoom function Off
[On]:
D.Zoom function On
AG-MDR25PJ.EJ(DVQP1328ZA)_E.book 113 ページ ２０１７年５月２２日 月曜日 午後６時１４分
