Panasonic POVCAM AG-MDR25E Operating Instructions Manual Download

Page: 235 / 261

- 235 -

ERROR
- UNABLE TO REPAIR
DATA.

This is displayed when the management
information cannot be recovered.

≥

Check the SD card.

Cannot use SD card in
recording mode, control
data error.

≥

The operation will stop.

≥

Use another SD card to perform
recording.

CONTROL DATA ERROR
HAS BEEN DETECTED.
(SD CARD)

Defective management information has
been found.

≥

The management information will be
automatically recovered after this
message is displayed.

CANNOT PLAY.

This is displayed when an error in the
recording folder name or file name has
occurred, for example.

≥

Check the SD card.

Cannot play this clip on
this model.

The clip cannot be played back because it
was recorded with another device.

≥

Play back the scene with the device
with which it was recorded.

Display

Description

Behavior and cause

AG-MDR25PJ.EJ(DVQP1328ZA)_E.book 235 ページ２０１７年５月２２日　月曜日　午後６時１４分

Summary of Contents for POVCAM AG-MDR25E






































































































































































































































































Search results

Summary of Contents for POVCAM AG-MDR25E

Reviews:

Related manuals for POVCAM AG-MDR25E

Brands by name

Popular brands

Panasonic POVCAM AG-MDR25E, Operating Instructions Manual

Search results

Summary of Contents for POVCAM AG-MDR25E

Reviews:

Related manuals for POVCAM AG-MDR25E

Brands by name

Popular brands