19
<Command Entry Example>
An example of executing the command to show the ipv6 address
information is shown below.
Fig. 2-3 Example of executing the command to show the ipv6 address
information
(1) IPv6 Status
Shows the IPv6 Status (Enabled or Disabled).
Enabled
The IPv6 function is enabled.
Disabled
The IPv6 function is disabled.
(2) MAC Address
Shows the Switching Hub's MAC address.
(3) IPv6 Address/prefixlen
Shows the Switching Hub's current IPv6 address in operation.
(4) IPv6 Link Local Address
Shows the Switching Hub's current ipv6 link local address in operation.
(5) IPv6 Default Gateway
Shows the Switching Hub's current IPv6 default gateway in operation.
M24eG> enable
M24eG# show ipv6 conf
IPv6 Status : Disable
MAC Address : 00:C0:8F:A0:13:98
IPv6 Address/prefixlen : ::/128
IPv6 Link Local Address : ::
IPv6 Default Gateway : ::
M24eG#
(1)
(2)
(3)
(4)
(5)
Summary of Contents for PN28480K-ID
