Panasonic PN28480K-ID, Operation Manual

Page: 252 / 438

252
<Setting display example>
The following is an execution example of the authentication status table
display command.
Fig. 4-8-2 Execution example of the authentication status table display
command
Total Hosts Displays the total number of hosts registered to the
authentication status table.
Maximum number of hosts retained is 384 for
M8eG/M16eG/M24eG and 1024 for M48eG.
Authorized
Hosts Displays the number of authorized hosts.
Auth Aging
Time Displays the authentication aging time in minutes.
(factory default setting: 1440)
Port Displays the port number to which the terminal is
connected.
MAC Address Displays the MAC address of the target terminal for
authentication.
Auth Type Displays the authentication method.
Displays the authentication method in successful
authentication if the authentication status is
"Authorized," or the authentication method while
listening if the authentication status is "Unauthorized."
1X/MAC/WEB Indicates one of 802.1X, MAC, and WEB
authentications.
1X/MAC Indicates either of 802.1X or MAC
authentication.
1X/WEB Indicates either of 802.1X or WEB
authentication.
MAC/WEB Indicates either of MAC or WEB
authentication.
802.1X Indicates the 802.1X authentication.
MAC Indicates the MAC authentication.
M24eG> enable
M24eG# show authentication sort port 1
Total Hosts :0
Authorized Hosts :0
Auth Aging Time :1440 minutes
Port MAC Address Auth Type Auth Status Remaining Aging Time
--------- ----------------- ---------- --------------- --------------------