142
3.5.7. Configuration of the Syslog Transmission
Function
Configure the syslog transmission function in "Global configuration mode."
Confirm the configuration information by executing the "show syslog conf"
command in "Privileged mode."
Command to show the syslog transmission function
M24eG#
show syslog conf
Command to enable the syslog transmission function configuration
M24eG(config)#
syslog server enable
Command to disable the syslog transmission function configuration
M24eG(config)#
syslog server disable
Command to enable the syslog transmission configuration
M24eG(config)#
syslog server enable <index>
Command to disable the syslog transmission configuration
M24eG(config)#
syslog server disable <index>
Command to set the facility configuration
M24eG(config)#
syslog facility <index> <facilities>
Command to delete the syslog server configuration
M24eG(config)#
clear syslog server <index>
Command to set the syslog server ip address configuration
M24eG(config)#
syslog server-ip <index> {<ip-address> | ipv6 <ipv6-address>}
Command to set the syslog header information configuration
M24eG(config)#
syslog header-info <index> {none | ip | sysname}
Summary of Contents for PN28480K-ID
