Panasonic PN28480K-ID, Operation Manual

Page: 13 / 438

13
Command-line Completion Support
• Enter a question mark (?) immediately after a command. This will
show command candidates to complete the entered command.
Fig. 1-3 Command-line completion support
Abbreviated Command Entry
After entering just enough characters of a command or an argument to
identify it uniquely, you can omit the rest of the command or the argument.
[Example of Abbreviated Command Entry]

enable

en

show running-config

sh ru
[Bad Example of Abbreviated Command Entry]

co

Because both "configure" and "copy" are possible, an error occurs.
Symbols used in the command description are as follows:
< > : Required - You must enter this.
{ | } : Selections - Select one from the selections.
[ ]
: Option - Enter as required.
Commands are case sensitive. Uppercase and lower case letters are treated as
different letters.
Note that in this manual, ports are specified for Switch-M24eG (24 ports)
except for a few commands. When entering a command, make sure to specify
existing port numbers of your switch.
M24eG# configure
M24eG(config)# ip address ?
<ip-address> ex: 192.168.1.1
M24eG(config)# ip address