Panasonic PN28480K-ID Operation Manual Download Page 135

Page: 135 / 438

135

Sets the login method to authenticate, using the username and
password.

[Parameter]

Parameter name

Description

<index>

：

The first method for authentication.

：

The second method for authentication.

{Local | RADIUS
| None}

Set a login method to authenticate, using the
username and password.
Local

RADIUS

None

auth-fail-action

Set the next action after the login method 1
authentication is failed.
method2

Use the login method 2
authentication

stop

Stop the authentication

[Factory Default Setting]

Parameter name

Factory default setting

<index>

None

{Local | RADIUS
| None}

：

Local

：

None

[Setting Range]

Parameter name

Setting range

<index>

1 to 2

{Local | RADIUS
| None}

None

[Note]

Parameter name

Note

—

None

Summary of Contents for PN28480K-ID























































































































































































































































































































































































































































Search results

Summary of Contents for PN28480K-ID

Reviews:

Panasonic PN28480K-ID, Operation Manual, Page: 135 / 438

Search results

Summary of Contents for PN28480K-ID

Reviews: