Panasonic PN28480K-ID, Operation Manual

Page: 81 / 438

81
<Command Entry Example>
An example of executing the command to show the port name
information is shown below.
Fig. 3-4-1 Example of executing the command to show the port name
information
(1) Jumbo
Shows the jumbo frame setting.
Enabled
The jumbo frame is enabled.
Disabled The jumbo frame is disabled.
(2) Port
Shows the port number.
(3) Trunk
Shows the group number for a trunked port.
M24eG> enable
M24eG# sh interface name
Jumbo Status : Enabled
Port Trunk Type Link Port Name EAP Pkt FW
---- ----- ----------- ---- --------------- ------------
1 --- 1000T Down PORT_1 Disabled
2 --- 1000T Down PORT_2 Disabled
3 --- 1000T Down PORT_3 Disabled
4 --- 1000T Down PORT_4 Disabled
5 --- 1000T Down PORT_5 Disabled
6 --- 1000T Down PORT_6 Disabled
7 --- 1000T Down PORT_7 Disabled
8 --- 1000T Down PORT_8 Disabled
9 --- 1000T Down PORT_9 Disabled
10 --- 1000T Down PORT_10 Disabled
11 --- 1000T Down PORT_11 Disabled
12 --- 1000T Down PORT_12 Disabled
13 --- 1000T Down PORT_13 Disabled
14 --- 1000T Down PORT_14 Disabled
15 --- 1000T Down PORT_15 Disabled
16 --- 1000T Down PORT_16 Disabled
17 --- 1000T Down PORT_17 Disabled
18 --- 1000T Down PORT_18 Disabled
19 --- 1000T Down PORT_19 Disabled
20 --- 1000T Down PORT_20 Disabled
21 --- 1000T Down PORT_21 Disabled
22 --- 1000T Down PORT_22 Disabled
23 --- 1000T Down PORT_23 Disabled
24 --- 1000T Down PORT_24 Disabled
M24eG#
(1)
(2) (3) (4)
(5) (6) (7)