104
4.4.7. MST Instance Port Configuration
Press C (command) and MSTP Instance ID on the screen of the MSTP Instance
Configuration, and then you can see “MST Instance Port Configuration” as
Figure 4-22. You can configure the port regarding MST instance, on this screen.
Figure 4-22: MST Instance Port Configuration
Screen Description
MST Instance
Displays the MST instance ID selected.
Port
Displays the port-number.
Trunk
If you configure trunking, the group number of the trunking (key) is displayed.
Link
Displays a link condition (or status).
UP
UP indicates that a link is normally established.
DOWN
DOWN indicates that a link is not established.
State
Displays a current port condition (or status).
Forwarding
This displays the status, which performs a normal communication
as a result of calculations.
Learning
Displays the status, which performs calculations based on informa
-
tion.
Discarding
Displays the status, which does not perform calculations.
N/A
Indicates the status that a port is not associated with a selected
MST instance.
PNxxxxxx Local Management System
MSTP Instance Configuration -> MST Instance Port Configuration
MST Instance: 0
Port Trunk Link State Role Priority. Path Cost STP Status
---- ----- ---- ---------- ---------- --------- ---------- ----------
1 --- Down forwarding nonStp 128 20000 Enabled
2 --- Down forwarding nonStp 128 20000 Enabled
3 --- Down forwarding nonStp 128 20000 Enabled
4 --- Down forwarding nonStp 128 20000 Enabled
5 --- Down forwarding nonStp 128 20000 Enabled
6 --- Down forwarding nonStp 128 20000 Enabled
7 --- Down forwarding nonStp 128 20000 Enabled
8 --- Down forwarding nonStp 128 20000 Enabled
9 --- Down forwarding nonStp 128 20000 Enabled
10 --- Down forwarding nonStp 128 20000 Enabled
11 --- Down forwarding nonStp 128 20000 Enabled
12 --- Down forwarding nonStp 128 20000 Enabled
-------------------------------- <COMMAND> -----------------------------------
Set Port Pr[i]ority [N]ext Page
Set Port Path [C]ost [P]revious Page
Set Port STP [S]tatus [Q]uit to previous menu
Command>
Enter the character in square brackets to select option