166
4.12.3. PPS Port Configuration
Press P (command) on the screen of the PPS Configuration, and then you can see
the “PPS Port Configuration” as Figure 4-55. You can perform the PPS port-con
-
figuration on this screen.
Figure 4-55: PPS Port Configuration
Screen Description
The following describes how to use several commands on this screen.
Port
Displays the port-number.
Trunk
Displays the condition (or status) of the trunking configuration with a group number.
Link
Displays a current link condition (or status).
Up
UP indicates that a link is normally established.
Down
DOWN indicates that a link is not established.
State
Displays a current port condition (or status).
Forwarding
Indicates the condition that the normal communication runs (or works)
as a result of calculations.
Learning
Indicates the condition that computations are performed (or operated)
based on information.
Discarding
Indicates the condition that computations are not performed.
AdminPri.
Displays the priority to use for automatically determining the communication path of
the PPS configured per port. The factory default settings is 128.
OperPri.
Displays the priority to automatically determine the communication path of the PPS,
which is assigned per port.
PNxxxxxx Local Management System
PPS Configuration -> PPS Port Configuration
Port Trunk Link State AdminPri. OperPri.
---- ----- ---- ---------- --------- --------
1 --- Down Forwarding 128 128
2 --- Down Forwarding 128 128
3 --- Down Forwarding 128 128
4 --- Down Forwarding 128 128
5 --- Down Forwarding 128 128
6 --- Down Forwarding 128 128
7 --- Down Forwarding 128 128
8 --- Down Forwarding 128 128
9 --- Down Forwarding 128 128
10 --- Down Forwarding 128 128
11 --- Down Forwarding 128 128
12 --- Down Forwarding 128 128
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page Set PPS [A]dmin Priority
[P]revious Page [Q]uit to previous menu
Command>
Enter the character in square brackets to select option