108
4.4.10. Regional Topology Information
Press G on the Multiple Spanning Tree Configuration menu, and then you can see
“Regional Topology Information” as Figure 4-25. This screen displays the configu
-
ration information on a spanning tree per port.
Figure 4-25: Regional Topology Information
Screen Description
The following describes how to use several commands on this screen.
Port
Displays the port-number.
Trunk
If trunking is configured, the group number (key) of trunking is dis
-
played.
Link
Displays a link-condition.
UP
Indicates the condition that the link is normally
established.
DOWN
Indicates the condition that the link is not established.
Cist Port Regional Root
Displays the ID of a root bridge.
Cist Port Regional Path Cost
Indicates the cost, which is being transmitted.
N
Displays the next page.
Press N (command) to display the next page.
P
Displays the previous page.
Press P to display the previous page.
Q
Returns to the top menu.
PNxxxxxx Local Management System
Multiple Spanning Tree Configuration -> Regional Topology Information
Port Trunk Link Cist Port Regional Root Cist Port Regional Path Cost
---- ----- ---- ----------------------- ----------------------------
1 --- Down 8000 0050405C266E 20000
2 --- Down 8000 0050405C266E 20000
3 --- Down 8000 0050405C266E 20000
4 --- Down 8000 0050405C266E 20000
5 --- Down 8000 0050405C266E 20000
6 --- Down 8000 0050405C266E 20000
7 --- Down 8000 0050405C266E 20000
8 --- Down 8000 0050405C266E 20000
9 --- Down 8000 0050405C266E 20000
10 --- Down 8000 0050405C266E 20000
11 --- Down 8000 0050405C266E 20000
12 --- Down 8000 0050405C266E 20000
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page [P]revious Page [Q]uit to previous menu
Command>
Enter the character in square brackets to select option