139
4.9.3. Port List Creation Menu
Press C (command) on the Port List Configuration menu, and then you can see Port
List Creation Menu as Figure 4-42. You can configure and delete the port-number
to operate a PoE scheduler on this screen.
Figure 4-42: Port List Creation Menu
Screen Description
The following describes how to use several commands on this screen.
Port List Index
Delete the Index number of the port list.
Port Members
Delete the port-number belonging to the port list.
I
Configures the Index number of a port list.
Press I (command), and then the appearance of the command prompt becomes "Enter Port
List index >". Enter the Index number of the port-number.
L
Configures the port-number belonging to the port list.
Press L (command), and then the appearance of the command prompt becomes “Enter
port-number >”. Enter the port-number belonging to the port list.
A
Applies the content configured. Press Q” without applying, and then the configuration is
deleted.
Q
Returns to the top menu.
PNxxxxxx Local Management System
Port List Configuration -> Port List Creation Menu
Port List Index :
Port Members :
-------------------------------- <COMMAND> -----------------------------------
Set Port List [I]ndex Set Port [L]ist
[A]pply Port List [Q]uit to previous menu
Command>
Enter the character in square brackets to select option