164
4.12.2. PPS Notification Configuration
Press N (command) on the screen of the PPS Configuration, and then you can see
“PPS Notification Configuration” as Figure 4-54. You can perform the
notification configuration of the PPS.
Figure 4-54: PPS Notification Configuration
Screen Description
Status
Displays the notification condition (or status) of the system log regarding the PPS.
Enable
Enables the notification of system log (factory default settings).
Disable
Disables the notification of system log.
Ports
Displays the target port, which obtains the statistic information on packets.
All the
ports are specified to the factory default settings.
Interval
Displays the interval of notifying packet statistic information with the unit of seconds.
The factory default settings is 5 seconds.
PNxxxxxx Local Management System
PPS Configuration -> PPS Notification Configuration
System Log
Status : Enabled
Counter
Ports : 1-28
Interval : 5 sec(s)
-------------------------------- <COMMAND> -----------------------------------
Set Notification [S]yslog Status
Add Notification [C]ounter Port
[D]elete Notification Counter Port
Set Notification Counter [I]nterval
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option