109
4.5.1. Quality of Service Configuration
Press U (command) on the Advanced Switch Configuration Menu, and then you
can see Quality of Service Configuration Menu as Figure 4-26. You can configure
the QoS (Quality of Service) of this device, on this screen.
Figure 4-26: Quality of Service Configuration
The following describes how to use several commands on this screen.
T
Moves to the configuration screen of Traffic Class.
Press T (command), and then the appearance of the screen becomes Traffic Class
Configuration Menu.
See next section (4.5.2) for this configuration contents.
E
Moves to the configuration screen of the bandwidth control.
Press E (command), and then the appearance of the screen becomes “Egress Rate
Limiting”. See next section (4.5.4) for this configuration contents.
Q
Returns to the top menu.
PNxxxxxx Local Management System
Advanced Switch Configuration Menu -> Quality of Service Configuration Menu
[T]raffic Class Configuration
[E]gress Rate Limiting
[D]iffserv Configuration
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option