Before Use
10
Quick Guide
1
Attach the Battery to the AC Adaptor and
charge it.
≥
Before use, fully charge the Battery.
≥
Since the Battery will not be charged when
the DC Cable is connected to the AC
Adaptor, disconnect it from the AC Adaptor.
≥
The [CHARGE] Lamp lights up, and charging
starts.
≥
When the [CHARGE] Lamp goes off,
charging is completed.
2
Attach the charged Battery to the
Camcorder.
ª
Inserting a Cassette
1
Slide the [OPEN/EJECT] Lever
1
toward the
front and pull down to open the Cassette
Compartment Cover.
2
Insert a Cassette.
3
Close the Cassette Holder by pressing the
[PUSH] mark
2
.
4
Close the Cassette Compartment Cover.
1
OPEN/
EJECT
PUSH
2
ª
Inserting a Card
1
Slide the [OPEN] Lever
1
to open the Card
Slot Cover
2
.
2
While holding the Memory Card with its cut
corner on top
3
, insert it into the Card Slot.
3
Close the Card Slot Cover
2
securely.
ª
Recording on a Tape
1
Set the [OFF/ON] Switch
1
to [ON].
≥
The [POWER] Lamp
2
lights up.
2
Set the Mode Dial to Tape Recording Mode.
3
Press the Recording Start/Stop Button.
≥
Recording starts.
4
Press the Recording Start/Stop Button
again to pause the recording.
1
2
OPEN
3
1
2
OF
F
ON
POWER
PC
S
D
PV-GS400Eng.book 10 ページ ２００４年６月４日 金曜日 午後３時１７分
