manualshive.com logo in svg

Panasonic KX-TG4000B, Operating Instructions Manual

Share
Download
Panasonic KX-TG4000B Operating Instructions Manual Download Page 99

99

Chapter 5

Useful Information

Remedy

•

If another call is received on the same line
while;
– the Automated Attendant System or

Answering System is responding to a call,
or

– a call is placed on hold,
the caller information will not be displayed.

•

The line mode selection is incorrect. See
page 54.

•

If the last number dialed was more than 32
digits long, the number will not be redialed.

•

Access numbers entered after pressing

(TONE)

will not be included when redialing.

•

The 

(REDIAL)

button also functions as the

(PAUSE)

button. It will redial the last

number dialed if pressed at the outset of a
call (p. 27). If another number has been
dialed first, it will operate as a pause button
(p. 44).

•

When the headset is connected (p. 87), you
must use the headset to talk with the caller.
To have a normal cordless phone
conversation, disconnect the headset.

•

Make sure that the headset is plugged into
the headset jack properly (p. 87).

•

Charge the battery fully (p. 16).

•

Clean the charge contacts and charge
again (p. 16, 17). 

•

Install a new battery (p. 89).

•

This is normal.   

Problem

When a second call is
received on the same line,
the unit does not display
the new caller’s
information.

You cannot redial the last
number dialed.

You cannot have a
conversation using the
handset.

You cannot have a
conversation using the
headset.

“

Recharge

” is displayed,

“

” flashes or the unit

beeps intermittently.

You charged the battery
fully, but “

Recharge

” is still

displayed and/or “

”

still continues to flash. 

The CHARGE indicator
light does not go out while
charging. 

Summary of Contents for KX-TG4000B













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands