Panasonic KX-TG4000B, Operating Instructions Manual

Page: 83 / 108

83
Chapter 4
V
oice Mail System/Automated Attendant System/
Answering System
To erase the pager number
1. Press
(FUNCTION)
, and press
or until the arrow points to
“
Pager setting
”, and press
H
.
2. While “
Pager number
” is at the
arrow, press
H
.
3. Press
(CLEAR)
.
4. Press
(ENTER)
.
•
The pager call mode will automatically
return to OFF (see below).
Setting the Unit to Call a Pager
To erase the pager display
number
1. Press
(FUNCTION)
, and press
or until the arrow points to
“
Pager setting
”, and press
H
.
2. Press or until the arrow
points to “
Pager display #
”,
and press
H
.
3. Press
(CLEAR)
.
4. Press
(ENTER)
.
1
Press
(FUNCTION)
.
2
Press or until the arrow
points to “
Pager setting
”,
and press
H
.
3
Press or until the arrow
points to “
Pager on/off
”, and
press
H
.
•
“
Off
” (factory preset) is displayed.
4
Select “
On
” by pressing or
.
5
Press
(ENTER)
.
•
A beep sounds.
•
To return to the standby mode,
press
(EXIT) .
•
If using the base unit, “
Pager
” will
be displayed.
P a g e r o n / o f f
: O n
∨∧
E N T E R = S a v e
•
If another message is received before
the unit alerts your pager for a
previous message, the previous caller
information will not be sent to your
pager. Only the last call received will
be sent to your pager.
•
If someone else makes or answers
another call with your unit before the
unit alerts your pager for a previous
message, the unit will stop alerting
your pager for that message.
•
If you receive a telephone number on
your pager but cannot recognize the
caller, you may have received a direct
inward dial (DID) call, such as from a
PBX. Please call your unit to check
the caller’s message.
If you have not subscribed to a Caller
ID service, the caller’s telephone
number will not be displayed on your
pager.
To turn off the pager call mode,
select “Off” in step 4.