manualshive.com logo in svg

Panasonic KX-TG4000B, Operating Instructions Manual

Share
Download
Panasonic KX-TG4000B Operating Instructions Manual Download Page 12

12

Installation

•

The battery cannot be overcharged.

•

If the backup battery has been discharged during a power failure, the unit will not
work. If required, you can connect a standard telephone on the same line. See
page 91.

BATTERY Indicator:

•

The BATTERY indicator lights while
the battery is being charged.

•

During a power failure (or if the AC
adaptor is disconnected), the
BATTERY indicator shows the
battery strength:
Full to Medium: The indicator lights.
Low: The indicator flashes.
No power: The indicator light is off.

Installing the Backup Battery in the Base Unit

A rechargeable Ni-Cd battery works as emergency power during a power
failure. The fully charged backup battery provides the base unit with a
minimum of 20 minutes operation. The battery is charged in the base unit
while the AC adaptor is connected (p. 13). It takes about 10 hours to
charge fully.

1

Open the battery cover.

2

Install the backup battery 
in the battery compartment.
Close the battery cover.

BATTERY Indicator

Summary of Contents for KX-TG4000B













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands