Panasonic KX-TG4000B Operating Instructions Manual Download Page 101

Page: 101 / 108

101

Chapter 5

Useful Information

Problem

During playback, incoming
call tones are heard.

The display does not show
the name and/or number of
the caller whose message
is being played.

A message cannot be
transferred to a destination
mailbox.

The unit does not alert your
pager.

Remedy

•

To answer the call, press the called line
button. To resume playback, press
after hanging up.

•

If the caller is not stored in the caller list,
the caller’s information will not be
displayed.

•

Another user has already transferred the
same message. Mailboxes will not receive
the same message even if it has already
been erased.

•

The line mode selection is incorrect. See
page 54.

•

If you cannot solve your problem, call our customer call center at
1-800-211-PANA(7262).

•

Panasonic’s e-mail address for customer inquiries:
[email protected]
for customers in the USA or Puerto Rico ONLY

Summary of Contents for KX-TG4000B













































































































Search results

Summary of Contents for KX-TG4000B

Reviews:

Brands by name

Popular brands

Panasonic KX-TG4000B, Operating Instructions Manual

Search results

Summary of Contents for KX-TG4000B

Reviews:

Brands by name

Popular brands