Panasonic KX-TG4000B Page 96 Operating Instructions Manual Download

Page: 96 / 108

Before Requesting Help

Problem

While programming or
searching, the unit starts to
ring and stops the
program/search.

The caller’s information is
not displayed.

The display goes to the
standby mode while
viewing the Caller List or
directory.

When a second call is
received on the same line,
the unit does not display
the new caller’s
information.

You cannot redial the last
number dialed.

You cannot have a
conversation using the
headset.

Remedy

•

To answer the call, lift the handset, press

(DIGITAL!SP-PHONE)

or the line button

whose indicator is flashing quickly. Start
again from the beginning after hanging up.

•

Other telephone equipment may be
interfering with your phone. Disconnect it
and try again.

•

Other electrical appliances connected to
the same outlet may be interfering with the
Caller ID information.

•

Telephone line noise may be affecting the
Caller ID information.

•

Do not pause for over 60 seconds while
searching.

•

If another call is received on the same line
while;
– the Automated Attendant System or

Answering System is responding to a call,
or

– a call is placed on hold,
the caller information will not be displayed.

•

The line mode selection is incorrect. See
page 54.

•

If the last number dialed was more than 32
digits long, the number will not be redialed.

•

Access numbers entered after pressing

(TONE)

will not be included when redialing.

•

Make sure that the headset is plugged into
the headset jack properly (p. 85).

•

If “

ENTER=Headset

” is displayed, press

(ENTER)

to switch from the speakerphone

to the headset.

Summary of Contents for KX-TG4000B













































































































Search results

Summary of Contents for KX-TG4000B

Reviews:

Related manuals for KX-TG4000B

Brands by name

Popular brands

Panasonic KX-TG4000B, Operating Instructions Manual

Search results

Summary of Contents for KX-TG4000B

Reviews:

Related manuals for KX-TG4000B

Brands by name

Popular brands