Panasonic KX-TG2357 Operating Instructions Manual Download Page 75

Page: 75 / 92

For assistance, please call: 1-800-211-PANA(7262)

Troubleshooting

Usef

ul Inform

ation

Answering System

You cannot have a
conversation using the
headset.

• Make sure the optional headset is connected

properly (p. 66).

• If “

SP-phone

” is displayed on the handset,

press

[

]

to switch to the headset.

Problem

Cause & Remedy

The Answering System is on,
but incoming messages are
not recorded.

• The recording time is set to “Greeting only”.

Select “1 minute”, “2 minutes” or “3 minutes”
(p. 22).

• Memory is full. Erase unnecessary messages

(p. 60).

“

” flashes and the

ANSWER ON indicator
flashes rapidly. No new
messages are recorded.

• Memory is full. Erase unnecessary messages

(p. 60).

You cannot operate the
Answering System from the
base unit or the handset.

• If another user is in use, you may not be able

to operate the Answering System. Try again
later.

• If another user is listening to messages or the

Answering System is handling a call, you
cannot operate the Answering System. Try
again later.

You cannot operate the
Answering System from a
touch tone phone.

• Make sure you entered the correct remote

code (p. 63).

• The Answering System may not respond if

the tones are too short to activate the unit.
Press each button firmly.

• The Answering System is off. Turn it on

(p. 65).

You cannot erase messages.

• While another user is operating the

Answering System or a caller is leaving a
message, you cannot erase messages.

When you play back
messages or turn on the
Answering System, the
handset and/or base unit
announces the wrong day and
time.

• The date and time may be set incorrectly.

Set the date and time again (p. 14).

Problem

Cause & Remedy

FULL

PQQX13991YA.book 75 ページ２００４年２月２５日　水曜日　午前１１時１２分

Summary of Contents for KX-TG2357





























































































Search results

Summary of Contents for KX-TG2357

Reviews:

Related manuals for KX-TG2357

Brands by name

Popular brands

Panasonic KX-TG2357, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2357

Reviews:

Related manuals for KX-TG2357

Brands by name

Popular brands