Panasonic KX-TG2357 Operating Instructions Manual Download Page 47

Page: 47 / 92

Intercom

lephone System

For assistance, please call: 1-800-211-PANA(7262)

Voice Paging

The base unit user can make a voice announcement that is heard through the
speakers of all handsets.

• Only the handset user who answers first can talk with the base unit user.
• To answer the page from the handsets, see “Answering Intercom Calls” on

page 46.

• It is not possible to specify which handset will hear the voice announcement.
• If a handset is too close to the base unit, you may hear feedback while making the

voice announcement.
Place the handset on the base unit or charger or press

[OFF]

• The announcement is heard at the handset ringer volume (p. 17).

Press

[LOCATOR/INTERCOM]

• The SP-PHONE indicator lights.

To make a voice announcement to all handsets, press

[3]

(

• You will hear a ringback tone (two short beeps) and the SP-PHONE indicator

flashes.

When the SP-PHONE indicator stops flashing, speak into the

MIC

• All handset users will hear your voice through their speakers after beeps, and

“

Call from Base

” will be displayed and the Ringer/Message Alert indicator

will flash rapidly on the handsets.

• The handset on the base unit will not be paged.

When finished, press

[SP-PHONE]

[LOCATOR/INTERCOM]

OR
When one of the handsets answers, talk into the

MIC

To disconnect the intercom, press

[SP-PHONE]

[LOCATOR/

INTERCOM]

Base Unit

PAGE

PQQX13991YA.book 47 ページ２００４年２月２５日　水曜日　午前１１時１２分

Summary of Contents for KX-TG2357





























































































Search results

Summary of Contents for KX-TG2357

Reviews:

Related manuals for KX-TG2357

Brands by name

Popular brands

Panasonic KX-TG2357, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2357

Reviews:

Related manuals for KX-TG2357

Brands by name

Popular brands