Panasonic KX-TG2357 Operating Instructions Manual Download Page 33

Page: 33 / 92

Using the Caller List

lephone System

For assistance, please call: 1-800-211-PANA(7262)

Viewing the Caller List

• If there is no name information for a caller, the display will only show the phone

number.

• Each handset has its own Caller List. If you viewed the Caller List or answered a

call on one handset, the same information in the other handset will be displayed

as “

missed

”.

• If you do not press any buttons for 60 seconds, the unit will exit the Caller List.

What “

” means

“

” indicates you have already viewed this calling

information or answered the call. If the same caller calls
again, the call entry with the “

” will be replaced with the

new call entry.

If a caller calls more than once

The number of times the same caller called is displayed
(“

” to “

”). The date and time of the most recent call will

be recorded. After viewing a caller’s information, “

” to

“

” will be replaced with “

”.

Calling Back from the Caller List

• In some cases, you may have to edit the number before dialing (p. 34).

(Ex. You may have to delete “1” and the area code.)

• If a phone number is not displayed in the caller information, you cannot call that

caller back from the Caller List.

Press

Rcvd calls

[

]

, or

[

]

to enter the

Caller List.

To search from the most recent call, press

[

]

To search from the oldest call, press

[

]

• The caller’s name, number and the time and date

of the call are displayed. Name and phone number
are alternately displayed as shown on the right.

Press

[OFF]

to exit the list.

Press

Rcvd calls

[

]

, or

[

]

to enter the Caller List.

Scroll to the desired caller by pressing

[

]

[

]

Press

[

]

[

]

• The phone number is dialed.

Handset

2 missed calls

Rcvd

Phone

calls

book

2 missed calls

=Scroll

list

All erase

Ex. 2 calls missed.

Example

SMITH,JACK

3:10P JUN.29

Erase Select

1-555-333-4444

3:10P JUN.29

Erase Select

SMITH,JACK

3:10P JUN.29

TURNER,CINDY

11:20A JUN.12

Ex. Called 2 times.

Handset

PQQX13991YA.book 33 ページ２００４年２月２５日　水曜日　午前１１時１２分

Summary of Contents for KX-TG2357





























































































Search results

Summary of Contents for KX-TG2357

Reviews:

Related manuals for KX-TG2357

Brands by name

Popular brands

Panasonic KX-TG2357, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2357

Reviews:

Related manuals for KX-TG2357

Brands by name

Popular brands