1.4 During a Conversation
User Manual
59
To put the third party on hold and talk to the original party
To leave a 3-party conference call
Leaving a Conference Call (Unattended Conference)
•
*
1
You may have to enter the Call Hold feature number after pressing the Recall/
hookswitch on your single line telephone (SLT), depending on the SLT Hold Mode of your
PBX.
Call Hold feature number:
–
Plan 1: 20 (United Kingdom/New Zealand: 50)
–
Plan 2/Plan 3: #20 (United Kingdom/New Zealand: #50)
Ask your manager or dealer about the mode assigned to your PBX.
•
*
2
Enter "#3" when "Plan 2" or "Plan 3" is selected as the numbering plan through system
programming.
•
To return to the held call before the third party joins,
press the corresponding CO or
INTERCOM button or press the Recall/hookswitch.
•
By pressing the CO button corresponding to an outside (CO) line that is not being used by
the conference, a proprietary telephone (PT) user can exit from the conference, leaving
the other 2 parties connected unless they are both on outside (CO) lines. If the other
parties are both on outside (CO) lines, they will be disconnected.
The PT user who originated a conference with 2 outside parties can leave the
conference and allow the other parties to continue the conversation. Certain
extensions may be restricted from executing this feature through system
programming.
Press
Recall/hookswitch
.
SLT
Talk.
PT/SLT
When you are talking with 2 extensions or
one extension and one outside party
On-hook.
The other 2 parties can continue
their conversation.
No SLT
