1.4 During a Conversation
52
User Manual
Holding in a System Parking Zone (Call Park)
You can put a call on hold in a common parking zone of the PBX so that any extension can retrieve the
parked call. Up to 10 calls can be parked in the PBX.
To park a call
•
*
1
You may have to enter the Call Hold feature number after pressing the Recall/
hookswitch on your single line telephone (SLT), depending on the SLT Hold Mode of your
PBX.
Call Hold feature number:
–
Plan 1: 20 (United Kingdom/New Zealand: 50)
–
Plan 2/Plan 3: #20 (United Kingdom/New Zealand: #50)
Ask your manager or dealer about the mode assigned to your PBX.
•
*
2
Enter "#59" when "Plan 2" or "Plan 3" is selected as the numbering plan through system
programming.
•
*
3
Enter "#5" when "Plan 2" or "Plan 3" is selected as the numbering plan through system
programming.
•
The CO or INTERCOM button light shows the current status as follows:
— General Call Hold mode
Flashing green slowly
: You have a call on hold.
Flashing red slowly
: Another extension has a call on hold.
— Exclusive Call Hold mode
Flashing green at moderate speed
: You have a call on hold.
Red on
: Another extension has a call on hold.
•
Hold Mode Change (proprietary telephone [PT] only)
Pressing the HOLD button again while a call is on hold switches the status from General
Call Hold mode to Exclusive Call Hold mode, or vice versa.
•
You cannot hold doorphone calls.
•
An SLT user can hold either one intercom call or one outside (CO) line call at a time, while
a PT user can hold one intercom call and multiple outside (CO) line calls. To hold multiple
calls, use the Call Park feature.
Dial
parking
zone number
(0–9).
During a conversation
PT/SLT
On-hook.
Enter
22
.
parking zone no.
2
2
C.Tone
C.Tone &
D.Tone
Press
HOLD
or
Recall/hookswitch
.
OR
*
1
