61
Chapter 6
Useful Information
Problem
You cannot program function items such
as the dialling mode.
You cannot store a phone number in
memory.
While programming function items or
storing numbers, the unit start to ring.
does not function.
The paged handset does not answer.
While using the intercom, two tones
sound.
The unit misdials when connected to a
PBX.
You cannot register the handset in the
base unit.
Remedy
•
Programming is not possible while the unit is in the
talk or intercom mode.
•
Do not pause for over 60 seconds while
programming.
•
You cannot store a phone number while the unit is in
the talk or intercom mode.
•
Do not pause for over 60 seconds while storing.
•
To answer the call, lift the handset or press
.
Start again from the beginning after hanging up.
•
The handset is too far from the base unit.
•
The handset is engaged in an outside call. Wait until
the in use indicator (
) light goes out.
•
The handset is not in the same radio area.
•
The handset is engaged in an outside call.
•
The handset has been cancelled or has not been
registered. Register the handset in the base unit
(p. 48).
•
A call is being received. To answer, press
twice.
•
Check the pause function (p. 27).
•
The base unit has registered a maximum of 6
handsets or the handset has registered a maximum
of 4 base units.
•
A wrong base unit password was entered. Enter the
correct password.
•
There is interference from other electrical units.
Locate the handset and base unit away from them.
•
You must finish registration within 1 minute after the
ringer tone sounds, or programming will be cancelled
(p. 48).
KX-TCD961EB.6(57~68) 99.9.27 7:30 PM Page 61
