Panasonic KX-TCD961EB Operating Instructions Manual Download

Page: 49 / 68

Chapter 5

Multi-Unit User Operations

Press

•

A confirmation tone sounds and the
display will return to the stand-by mode.

PROG

Selecting the Base Unit Access

Automatic base unit access

The handset automatically selects a registered base unit.

•

When the handset moves to another base unit radio area, it loses contact with the previous base unit
and automatically accesses the new base unit.

•

If the handset is in the overlap area between several base unit radio areas, the handset will access a
base unit in the order of the base unit numbers.

Specified base unit access

You can only select one registered base unit (1 to 4) you want to operate.

•

You can choose the base unit/telephone line where you can make/receive calls.

The factory preset is “Automatic base unit access”. To select the desired base unit, program as
follows.

Press

until “

F i

” is displayed.

Press

•

The current setting is flashing.
0: Automatic base unit access
1 to 4 (The registered base unit number):
Specified base unit access

Press

to select the desired

base unit number (1 to 4).

•

You can also press the desired base unit
number

•

The selected base unit number flashes.

PROG

F i

0 i234

Ex. Automatic base unit access is selected.

F i

0 i234

Ex. Base unit 1 is selected.

KX-TCD961EB.5(47~56) 99.9.27 7:31 PM Page 49

Summary of Contents for KX-TCD961EB





































































Search results

Summary of Contents for KX-TCD961EB

Reviews:

Related manuals for KX-TCD961EB

Brands by name

Popular brands

Panasonic KX-TCD961EB, Operating Instructions Manual

Search results

Summary of Contents for KX-TCD961EB

Reviews:

Related manuals for KX-TCD961EB

Brands by name

Popular brands