Panasonic KX-TA624, Installation Manual

Page: 207 / 437

System Programming
4-83
4.2 System Programming [801]-[802]
Assigns the following 2 printing parameters to match the SMDR output with the paper size
used in the printer.
Page Length: Sets the number of lines per page.
Skip Perf:
Sets the number of lines to be skipped at the end of every page.
Default Page length – 66 lines
Skip perforation – 0 line
• The page length should be at least 4 lines
longer than the skip perforation length.
• To correct a wrong entry, press the CLEAR
button and enter the new one.
• Feature Reference
Section 3, Features
Station Message Detail Recording (SMDR)
1 0 8
[801] SMDR Parameter
NEXT STORE
NEXT
< Sets the page length >
< Sets the skip perforation >
!
!
66 lines
page
length
skip
perforation
machine
perforation
Standard paper
for the SMDR
(11 inches)
page length
(4···99)
skip perforation
(0···95)
END STORE
Determines which calls will produce an SMDR printout.
*
1
Outgoing: On (Print all calls) / Off (No printing) / Toll (Print toll calls only)
* 2 Incoming: On (Print all calls) / Off (No printing)
Default Outgoing calls / Incoming calls – On
• If “Outgoing; Toll” is selected, only calls which are checked in programs [302]–[305] “Call
Barring – Classes 2 through 5 Denied Codes” and are allowed, are printed out.
• Feature Reference
Section 3, Features
Station Message Detail Recording (SMDR)
[802] Incoming/Outgoing Call Selection for Printing
2 0 8
NEXT
SELECT
(On/Off/Toll)* 1
STORE
NEXT SELECT
(On/Off)* 2
STORE
< Sets an outgoing call > < Sets an incoming call >
!
!
END
<Example>
☞
☞
(Perforation)
PSQX1708ZA-12E.QX 99.10.15 1:09 PM Page 83