Panasonic KX-TA624 Installation Manual Download Page 356

Page: 356 / 437

1.5

During a Conversation

1-50

Operations

Transferring after paging (Paging and Transfer)

You can transfer a call using the paging function (All Extensions, Group, External, or All
Extensions & External).

PT and SLT

Dial tone

Confirmation tone

Wait for an answer.

Announce.

During a conversation

Hang up or press
SP-PHONE.

For a PT: Press TRANSFER.
For an SLT: Press Recall.

For an SLT

For a PT

TRANSFER

group no.

For all extensions.

For a group.

For external.

For all extensions
& external.

For all extensions: Dial 330.
For an extension group: Dial 331 through 338.
For external: Dial 34.
For all extensions & external: Dial 33 or 339.

• The other party is placed on hold.

• The held party and the paged extension are

connected and can start a conversation.

• You may dial “339” instead of “33

”.

• If the external paging access tone is set to “Disable”, a splash tone from the external paging

equipment will not be heard after accessing external paging. Refer to System Programming,
“External Paging Access Tone”.

• If “Hold-3” is assigned in System Programming, you must dial “50” after pressing the

Recall button.

SLT

PSQX1709ZA-04.QX 99.10.15 9:57 AM Page 50

Summary of Contents for KX-TA624






















































































































































































































































































































































































































































Search results

Summary of Contents for KX-TA624

Reviews:

Related manuals for KX-TA624

Brands by name

Popular brands

Panasonic KX-TA624, Installation Manual

Search results

Summary of Contents for KX-TA624

Reviews:

Related manuals for KX-TA624

Brands by name

Popular brands