DECT CORDLESS PHONE ACTIVATION
Activating your Yealink IP DECT W52P cordless phone is quick
and easy. Simply locate your Activation Code (located in your
shipping confirmation email) and follow these simple instructions.
1. Unpack your phone.
• All ordered phones should arrive at the shipping address
indicated in your order.
• Verify all components were shipped.
• Handset
• Charger Cradle
• Base Station
• Belt Clip
• Two Rechargable Batteries
• Two Power Adaptors (for Base Station and Charger Cradle)
• Ethernet cord
• If any components are missing, please contact ANPI Service
Delivery at (877) 895-2172.
2. Install your phone.
(You must have a working Internet connection.)
• To set up your Base Station:
• Plug the included ethernet cable into your network’s Local
Area Network (LAN) port.
• If you need assistance locating this port, contact your
IT administrator.
• Locate the Internet port on the back of the Base Station, and
plug in the other end of the ethernet cable.
• Connect an included Power Adaptor cord to the power port on
the back of the Base Station.
• Plug the other end of the Power Adaptor into your power
outlet.
• To set up your Handset:
• Insert the two included batteries.
• Connect the second included Power Adaptor cord to the
Charger Cradle.
• Plug the other end of this Power Adaptor into an outlet.
• Place the Handset onto the Charger Cradle.
3. Activate your phone.
• Press the Call key (green handset icon).
• The voice prompt will ask for the Activation Code.
• The Activation Code is located in your shipping confirmation
email (and in the ANPI VIP Customer Administration Portal at
vip.anpi.com).
• Any Activation Code will work with any phone ordered, so
please make sure that each user has the phone
they requested.
• Input your Activation Code - your phone is ready to use.
• If you have any issues, please contact ANPI Service Delivery
at (877) 895-2172.
4. Set up your voicemail.
• Dial your extension, then follow the voice prompts.
