127
Setup from the Front Panel and WebSetup
■
PS Setup tab
The options that you can set from the PS Setup tab are described below.
Print to PS Error—Specify whether the KX-P8420 should print the
available portion of a print job when it encounters a PostScript error. Select
Yes
to print an extra page with PostScript error messages. Select
No
to
cancel the job entirely whenever a PostScript error is encountered.
NOTE:
•
In some cases, the extra page may be printed even when
No
is selected.
Cover Page—Specify whether the KX-P8420 prints a cover (job summary)
page at the end of each print job. If you select
Yes
, each print job is followed
by a page containing the name of the user who sent the job, the document
name, the server name, the time the job was printed, the number of pages
printed, and the status of the job. If a PostScript error occurs, and the
to PS Error
option is set to
Yes
, an error message takes the place of the job
status.
NOTE:
•
Some information may not be printed depending on the operating system
on which a job is printed.
When you have finished specifying settings from Fiery WebSetup, click
Save, and then close the Fiery WebSetup window by clicking the
X
in the
top-right corner of the window. The Reboot window appears, and you are
asked whether to reboot the computer or not. Select
Yes
to reboot the
printer and initialize the new settings.
Saving your
settings and
exiting
Fiery WebSetup
