Panasonic KX-NSX2000 Operating Manual Download Page 111

Page: 111 / 316

To start the Subscriber Tutorial

PT/SLT/PS/SIP Extn.

The Unified Messaging system will announce,
"Welcome to the Panasonic Unified Messaging
System. This is the Subscriber Tutorial service.".

your password

Enter

your password

and

Enter

to accept.

To set your password for the first time

To record the Owner’s Name
(Your Subscriber Name)

your new password

To change your password

To confirm the settings

Enter

to end

recording.

Enter

to end

recording.

Enter

to accept.

Review

Record the

message again

Add

Delete and exit

On-hook.

Enter

to accept.

Enter

your new password

and

Enter

State your name.

C.Tone

Record your greeting message.

C.Tone

To record your greeting messages

Enter

the desired option

CAUTION

•

It is strongly recommended that a password of 16 numbers be used for maximum
protection against unauthorised access.

•

To avoid unauthorised access to the PBX, keep the password secret. If it becomes
known to others, the PBX may be misused.

•

Change the password periodically.

1.8.2 Logging in to and Configuring Your Mailbox

Operating Manual

111

Summary of Contents for KX-NSX2000





























































































































































































































































































































Search results

Summary of Contents for KX-NSX2000

Reviews:

Related manuals for KX-NSX2000

Brands by name

Popular brands

Panasonic KX-NSX2000, Operating Manual

Search results

Summary of Contents for KX-NSX2000

Reviews:

Related manuals for KX-NSX2000

Brands by name

Popular brands