Panasonic KX-NSX2000 Operating Manual Download Page 152

Page: 152 / 316

To cancel Live Call Screening

Press red

Live Call Screening

PT/PS

(Live Call
Screening)

Operation Flowchart

The operations in the shaded areas can be done hands-free.

Hands-free Mode

Private Mode

Stop

monitoring

Answering

the call

Stop

monitoring

Answering

the call

Monitoring

Monitoring (Hands-free)

Monitoring (Handset)

No operation

Stop

monitoring

Answering

On-hook.

(Live Call
Screening)

(Alarm Tone)

Press

SP-PHONE

MONITOR

Press

Live Call
Screening

Off-hook.

Press

Live Call

Screening

Press

SP-PHONE, MONITOR

Live Call

Screening

(Live Call
Screening)

Off-hook.

MONITOR

Press

SP-PHONE

MONITOR

PT/PS

•

The Live Call Screening (LCS) button light shows the feature status as follows:

Off:

LCS is off.

Flashing green rapidly:

Alerting in the Private mode.

Flashing green slowly:

Monitoring.

Red on:

LCS is on.

•

The manager extension can clear an extension PIN.

•

This feature is available for a single line telephone if it is connected to a proprietary
telephone in parallel. (Private mode only)
To answer the call while monitoring, press Recall/hookswitch.

•

Only the handset monitoring in the Private mode is available for PS users.

1.8.6 Other Features

152

Operating Manual

Summary of Contents for KX-NSX2000





























































































































































































































































































































Search results

Summary of Contents for KX-NSX2000

Reviews:

Related manuals for KX-NSX2000

Brands by name

Popular brands

Panasonic KX-NSX2000, Operating Manual

Search results

Summary of Contents for KX-NSX2000

Reviews:

Related manuals for KX-NSX2000

Brands by name

Popular brands