Panasonic KX-NSX2000 Operating Manual Download Page 21

Page: 21 / 316

Button

Feature

Single-CO (S-CO)

Used to access a specified outside line for making or receiving outside
calls.

Direct Station Selection
(DSS)

Used to access an extension with one touch.
It is also possible to be changed to the other feature button.

One-touch Dialling

Used to access a desired party or system feature with one touch.

Incoming Call Distribution
Group (ICD Group)

Used to access a specified incoming call distribution group for making or
receiving calls.

Message

Used to leave a message waiting indication or call back the party who
left the message waiting indication.

Message for Another
Extension

Used to have a Message button for another extension.

Call Forwarding (FWD)/Do
Not Disturb (DND)—Both
calls

Used to forward all calls to a specified destination or refuse.

FWD/DND—Outside calls

Used to forward outside calls to a specified destination or refuse.

FWD/DND—Intercom calls

Used to forward intercom calls to a specified destination or refuse.

Group FWD—Both calls

Used to forward all the calls to your group to a specified destination.

Group FWD—Outside calls

Used to forward the outside calls to your group to a specified destination.

Group FWD—Intercom calls

Used to forward the intercom calls to your group to a specified
destination.

Account

Used to enter an account code.

Conference

Used to establish a multiple party conversation.

Terminate

Used to disconnect the current call and make another call without
hanging up.

External Feature Access
(EFA)

Used to access special features offered by a host PBX or a telephone
company.

Call Charge Reference

Used to check the total call charge for your own extension.

Call Park

Used to park or retrieve a call in a preset parking zone.

Call Park (Automatic Park
Zone)

Used to park a call in an idle parking zone automatically.
Set both the Call Park (Automatic Park Zone) button and the Call Park
(preset parking zone) button.

Call Log

Used to show the incoming call information.

Call Log for ICD Group

Used to have a Call Log button for incoming call distribution group.

Log-in/Log-out

Used to switch between the log-in and log-out mode.

Log-in/Log-out of a specified
group

Used to have a Log-in/Log-out button for another incoming call
distribution group.

Log-in/Log-out for all groups

Used to have a Log-in/Log-out button for all groups.

Hurry-up

Used to transfer the longest waiting call in the queue of an incoming call
distribution group to the overflow destination.

Wrap-up

Used to switch the wrap-up status, Ready and Not Ready mode.

1.1.5 Before Operating the Telephones

Operating Manual

Summary of Contents for KX-NSX2000





























































































































































































































































































































Search results

Summary of Contents for KX-NSX2000

Reviews:

Related manuals for KX-NSX2000

Brands by name

Popular brands

Panasonic KX-NSX2000, Operating Manual

Search results

Summary of Contents for KX-NSX2000

Reviews:

Related manuals for KX-NSX2000

Brands by name

Popular brands