manualshive.com logo in svg

Panasonic KX-NS700, User Manual, Page: 389 / 394

Share
Download
Panasonic KX-NS700 User Manual Download Page 389

Reorder Tone

The outside line you tried to seize is
not assigned or denied.

1 s

Ringback Tones

 

Tone 1

1 s

Tone 2

(Not available for KX-UT series SIP
phones)

1 s

Do Not Disturb (DND) Tone

(Not available for KX-UT series SIP
phones)
The dialled extension is refusing
incoming calls.

1 s

While off-hook

Indication Tones

 

Tone 1

Call waiting tone

15 s

Tone 2

A call is on hold longer than the
specified time

15 s

When talking to an outside party

Warning Tone

This tone is sent 15, 10 and 5
seconds before the specified time for
disconnection.
For KX-UT series SIP phones, this
tone is sent only once 15 seconds
before the specified time for
disconnection.

1 s

When setting the features or programming

Confirmation Tones

 

User Manual

389

5.4.1 What is This Tone?

Summary of Contents for KX-NS700











































































































































































































































































































































































































Reviews:

No comments