manualshive.com logo in svg

Panasonic KX-NS700, User Manual, Page: 28 / 394

Share
Download
Panasonic KX-NS700 User Manual Download Page 28

Button

Feature

Log-in/Log-out for all groups

Used to have a Log-in/Log-out button for all groups.

Hurry-up

Used to transfer the longest waiting call in the queue of an incoming call
distribution group to the overflow destination.

Wrap-up

Used to switch the wrap-up status, Ready and Not Ready mode.

System Alarm

Used to confirm a PBX error.

Time Service (Day/Night/
Lunch/Break)

Used to switch the time service mode.

Answer

Used to answer an incoming call.

Release

Used to disconnect the line during or after a conversation or to complete
a Call Transfer.

Toll Restriction/Call Barring

Used to change the toll restriction/call barring level of other extension users
temporarily.

ISDN Service

Used to access an ISDN service.

Calling Line Identification
Restriction (CLIR)

Used to switch between the CLIP and CLIR services.

Connected Line Identification
Restriction (COLR)

Used to switch between the COLP and COLR services.

ISDN-Hold

Used to transfer a call using telephone company.

Headset

Used to talk using the headset.

Time Service Switching Mode
(Automatic/Manual)

Used to switch the time service mode, Automatic or Manual.

Two-way Record

Used to record a conversation into your own mailbox.

Two-way Transfer

Used to record a conversation into the mailbox of a specific extension.

One-touch Two-way Transfer

Used to record a conversation into the mailbox of a specific extension with
one touch.

Live Call Screening (LCS)

Used to monitor your own voice mailbox while an incoming caller is leaving
a message and, if desired, intercept the call.

Voice Mail Transfer

Used to transfer a call to the mailbox of a specified extension. Also used
to access the Unified Messaging system or the voice mail features of a
VPS with one touch.

Network Direct Station
Selection (NDSS)

Used to access an extension connected to other PBXs in the network with
one touch.

CTI

Used to access CTI features.

Check-in

Used to switch the room status of extensions from Check-out to Check-in.

Check-out

Used to switch the room status of extensions from Check-in to Check-out.

Cleaned-up

Used to switch the room status of extensions between Ready and Not
Ready.

Primary Directory Number 
(PDN)

Used to make and receive both outside and intercom calls.

28

User Manual

1.1.5 Before Operating the Telephones

Summary of Contents for KX-NS700











































































































































































































































































































































































































Reviews:

No comments