manualshive.com logo in svg

Panasonic KX-NS700, User Manual

The Panasonic KX-NS700 user manual is essential for getting the most out of your device. Discover all the features, settings, and troubleshooting tips in this comprehensive manual available for free download at manualshive.com. Maximize your experience with this powerful communication system with just a few simple clicks.

Share
Download
background image

2.2  Configuring Unified Messaging Features

2.2.1  System Manager Features

The System Manager can configure mailboxes, change class of service (COS) settings for subscribers, etc.

–

 Logging in to the System Manager’s Mailbox

–

 Setting Up Mailboxes

–

 Setting Class of Service (COS) Parameters

–

 Remote Time Service Mode Setting

–

 Changing the Company Greeting and Incoming Call Service Setting

–

 Broadcasting Messages

–

 Changing the System Manager’s Password

 Logging in to the System Manager’s Mailbox

The procedures described in this section require the System Manager to use a telephone, however, many of
these procedures can also be performed using a PC with Web Maintenance Console. For more information,
consult your dealer.
In order to perform these procedures with a telephone, the System Manager must log in before performing any
System Manager tasks. To log in as the System Manager, 3 items of information must be known: the UM
group’s floating extension number to access the Unified Messaging system, the System Manager’s mailbox
number, and the System Manager’s mailbox password.

–

The System Manager’s mailbox number is 999 (default) depending on the mailbox number length specified
in system programming.

–

The System Manager’s password can be assigned by the System Administrator using Web Maintenance
Console or by the System Manager using his or her extension telephone (refer to "

 Changing the

System Manager’s Password").

•

Before the System Manager can perform any System Manager tasks, "System Manager
Access from Telephone" must be enabled and "Password for System Manager (Up to 16
numeric digits)" must be set by the System Administrator using Web Maintenance Console.

•

After logging in, the system will announce the number of total messages, the number of new
messages, or the length of new messages. These announcements depend on the mailbox
settings and COS settings for the System Manager.

•

If there are new messages in the mailbox, the messages will be played automatically. The
System Manager can listen to them continuously without listening to the system prompts.
This feature is only available when "Autoplay New Message" is activated for the System
Manager’s COS.

•

If the Unified Messaging system is being programmed via Web Maintenance Console, the
System Manager cannot create or edit mailboxes. The system will announce, "Sorry, this
function is not available".

•

For more information on logging in, refer to "Logging in to Your Mailbox for the First Time".

•

Manager Service switching

You can switch mailboxes simply by pressing ## from the subscriber service menu, in the
following order:

Subscriber service

Message Manager service

System Manager service

User Manual

277

2.2.1 System Manager Features

Summary of Contents for KX-NS700











































































































































































































































































































































































































Reviews:

No comments

Related manuals for KX-NS700

Aastra OpenCom 100 series Short Installation Manual preview
OpenCom 100 series
Brand: Aastra Pages: 2
Panasonic KX-TDE200 Installation Manual preview
KX-TDE200
Brand: Panasonic Pages: 204
Panasonic KX-NCP500 Pc Programming Manual preview
KX-NCP500
Brand: Panasonic Pages: 892
MCK EXTender 7000 Installation Manual preview
EXTender 7000
Brand: MCK Pages: 85

Brands by name

Popular brands

Load more brands