background image

1.9.11  Setting the Parallelled Telephone to Ring (Parallelled
Telephone)

In the case where a single line telephone is connected in parallel to your digital
proprietary telephone, you can choose whether the parallelled single line telephone will
ring to an incoming call or not.
(Default: Ring)

DPT

Off-hook.

On-hook.

Enter 

1

 to ring

or 

0

 not to ring.

Ring

No ring

1

0

OR

Enter    

39

.

3

9

C.Tone

Even if "No ring" is selected,

 calls can be made and answered on the single line telephone

by lifting the handset.

If you go off-hook while your parallelled telephone is in use,

 the call will switch over to

you.

This feature is not available for the KX-T7665.

212

User Manual

1.9.11 Setting the Parallelled Telephone to Ring (Parallelled Telephone)

Summary of Contents for KX-NS700











































































































































































































































































































































































































Reviews: