Panasonic KX-NS500, Installation Manual

Page: 192 / 338

–
KX-TVM series: version 1.0 or later
Notice
•
Only data recorded by users can be imported; the preinstalled guidance data will not be imported.
•
The language set for the KX-TVM series VPS must be set as the language for the Unified Message
system where the voice data will be imported. If the language is different, the data cannot be imported.
•
The following content of KX-TVM mailbox's audio data is not restored as the Unified Messaging system
Mailbox data.
–
Receive message: Mailbox number of Recorder
–
Transfer message: Mailbox number of Recorder/Sender
–
Confirmation of hearing a message: Mailbox number of the responder
In this case, the message is treated as if it were recorded by a non-subscriber.
–
Mailbox number of Recorder/Sender/Responder is not announced in restored audio data.
–
When IMAP integration is used, “Unknown Caller” is shown in the “From” field.
1.
Connect a PC to the KX-TVM series VPS, and then start the KX-TVM Maintenance Console.
For details about connecting a PC to the VPS or about the Maintenance Console, refer to the appropriate
documentation.
2.
In Maintenance Console, back up the voice data on the KX-TVM series VPS to the PC.
For details about backing up KX-TVM VPS voice data, refer to the documentation of the corresponding
VPS.
3.
Start the Main Unit, and then start Web Maintenance Console.
4.
Navigate to Maintenance
®
Tool
®
10. UM data restore, and then select the types of voice data you want
to restore (i.e., import). You can select the following types of data:
a.
System prompts
•
For batch restore
Under System Prompts, select the System Prompts check box.
Condition:
The Unified Messaging system has only 8 system prompts, which is less than the number on
KX-TVM VPSs. If you restore system prompts, Prompt 9 and Prompt 10 on the KX-TVM VPS will
not be restored. To import Prompt 9 and Prompt 10 to the Unified Messaging system, they must
be restored individually.
•
For individual restore
You can select the voice data to restore one at a time as necessary.
–
Installed Prompts – Prompt1 to 8
–
Custom Service Menu
–
Company Name
–
Company Greeting
–
System Mailbox Group Voice Label
–
System Caller Name
–
Prompt Selection
–
Hold Announce Menu
b.
Mailbox Prompts and Mailbox Messages
•
For batch restore
Under Mailbox Prompts, select the Mailbox Prompts check box, and then select the Mailbox
Messages check box.
•
For individual restore
You can select the voice data to restore one at a time as necessary.
–
Owner Name
–
Personal Greetings
–
Personal Caller ID Name
–
Interview
–
Personal Group List Name
192 Installation Manual
5.3 Starting Web Maintenance Console