Panasonic KX-NS1000, User Manual

Page: 109 / 382

•
When using a proprietary telephone, you can set or cancel Call Forwarding by pressing the
FWD/DND button (fixed button) instead of " 710".
When using a KX-UT series SIP phone, you can also press the FWD/DND button and then
press up or down with the Navigator Key to set or cancel Call Forwarding for all calls.
To set the timer for "No Answer" and "Busy/No Answer"
Off-hook. Enter
time
(
seconds
[2 digits]).
time
PT/SLT/PS/SIP Extn./S-PS
Enter
713
.
On-hook.
1 3 7
C.Tone
To set/cancel (Call Forwarding [FWD] for your Incoming Call Distribution Group)
PT/SLT/PS/SIP Extn./S-PS
0
1
Set
Cancel
OR
Enter
1
to set
or
0
to cancel.
Enter
ICD Group
extension number
.
ICD Group
extension no.
Off-hook.
5
6
4 Both Calls
Intercom Calls
Outside Calls
OR
OR
Enter
71
.
1 7
Enter
4
to
6
as
you desire.
Enter
#
. On-hook. Enter
destination extension number
.
Or enter
outside line access number
and then
outside phone number
.
OR
(max. 32 digits)
outside
phone no.
outside line
access no.
C.Tone
ICD Group: Incoming Call Distribution Group
For "Cancel", go on-hook
directly after entering ICD
Group extension number.
destination
extension no.
•
For KX-UT series SIP phones, when Call Forwarding or Do Not Disturb is enabled, FWD/
DND appears on the display in stand-by mode.
•
The FWD/DND button light shows the current status as follows:
Off : Both features are not set.
Red on : FWD mode
Flashing red slowly : DND mode
For KX-UT series SIP phones, you can see the current status on the display.
•
The Group FWD button light shows the current status as follows:
Off : No set
Red on : FWD mode
User Manual 109
1.6.1 Forwarding Calls