Panasonic KX-NS1000 Operating Manual Download Page 301

Page: 301 / 366

Item

Description

Transfer to specified telephone number - 1

If "None" or "Call screening" is selected for

Selection

, specifying a

telephone number here will transfer the caller to that telephone
number.
Enter a maximum of 32 characters consisting of 0–9, , and #.

Note

If "Call screening" is selected, the transfer destination will hear
the call screening prompt before the call is transferred.

Transfer to specified telephone number 2, 3, 4, 5 (Selection/Other)

If "None" or "Call screening" is selected for

Selection

, and the call

could not be transferred to the number specified in

Transfer to

specified telephone number- 1

, the call will be transferred

according to these settings for this scenario, in numerical order of
priority.

Note

If "Call screening" is selected, the transfer destination will hear
the call screening prompt before the call is transferred.

Select

Other

Extension

, or

Covering Extension

If "Other" is specified, enter a maximum of 32 characters
consisting of 0–9, , and #.

Incomplete Call Handling for No Answer

Specifies how the scenario handles a call when there is no answer.
More than one option can be selected.

•

Leave a Message

: Allows the caller to record a message.

•

Transfer to a covering extension

: Transfers the caller to a covering

extension.

•

Page the mailbox owner by intercom paging

: Pages you by

intercom.

•

Transfer to operator

: Transfers the caller to an operator.

•

Return to top menu

: Lets the caller return to top menu and try

another extension.

•

Transfer to specified Custom Service Menu

: Transfers the caller to

the specified Custom Service.

3.2.1 User Programming

Operating Manual

301

Summary of Contents for KX-NS1000















































































































































































































































































































































































Search results

Summary of Contents for KX-NS1000

Reviews:

Panasonic KX-NS1000, Operating Manual, Page: 301 / 366

Search results

Summary of Contents for KX-NS1000

Reviews: