manualshive.com logo in svg

Panasonic KX-NS1000, Operating Manual, Page: 124 / 366

Share
Download
Panasonic KX-NS1000 Operating Manual Download Page 124

Personal Greetings:

The following Personal Greeting Messages can be recorded in the subscriber tutorial. After the greeting is
played, a tone will sound, and the caller can leave a message.

•

No Answer Greeting:

 Heard by callers when you do not answer their calls. A common example might

be, "This is (name). I can’t take your call right now…".

•

Busy Signal Greeting:

 Heard by callers when you are on another call. A common example might be,

"This is (name). I’m on another call right now…".

•

After Hours Greeting:

 Heard by callers when the Unified Messaging system is in night mode. A common

example might be, "This is (name). I’ve gone home for the day…".

•

If you do not record a greeting message, a prerecorded greeting message will be used.

1.8.2 Logging in to and Configuring Your Mailbox

124

Operating Manual

Summary of Contents for KX-NS1000















































































































































































































































































































































































Reviews:

No comments