Panasonic KX-NS1000 Page 242 Operating Manual Download

Page: 242 / 366

During a conversation with an extension

PT/PS

(Toll Restriction/

Call Barring)

Press

Toll Restriction/

Call Barring

On-hook.

The extension can hear the dial

tone and then make a call.

C.Tone

•

The restriction level is changed to the preprogrammed level of Toll Restriction/Call Barring
button.

•

The restriction level of SIP phones and S-PSs cannot be changed.

Customising Your Phone

•

3.1.3 Customising the Buttons
Create or edit a Toll Restriction/Call Barring button.

2.1.4 Turning on the External Background Music (BGM)

The manager extension can select and broadcast background music in the office through external speakers.

To select and start/stop the background music

PT/SLT/PS/SIP Extn./S-PS

Off-hook.

On-hook.

Enter

35.

C.Tone

BGM no.

Enter

BGM number

(1 digit) or

to stop.

Enter

external pager

number

(2 digits: 01–96)

or for all.

external pager no.

•

One-look Network

In a One-look network, pagers are numbered sequentially based on the site number and the pager's
port.

The following matrix shows how pagers are numbered.

Pager Numbering

Port

No.

Site ID

2.1.4 Turning on the External Background Music (BGM)

242

Operating Manual

Summary of Contents for KX-NS1000















































































































































































































































































































































































Search results

Summary of Contents for KX-NS1000

Reviews:

Related manuals for KX-NS1000

Brands by name

Popular brands

Panasonic KX-NS1000, Operating Manual

Search results

Summary of Contents for KX-NS1000

Reviews:

Related manuals for KX-NS1000

Brands by name

Popular brands