manualshive.com logo in svg

Panasonic KX-NS1000, Operating Manual, Page: 167 / 366

Share
Download
Panasonic KX-NS1000 Operating Manual Download Page 167

To cancel Live Call Screening

Press red 

Live Call Screening

.

PT/PS

(Live Call
 Screening)

Operation Flowchart

The operations in the shaded areas can be done hands-free.

Hands-free Mode

Private Mode

Stop 

monitoring

Answering 

the call

Stop 

monitoring

Answering

the call

Monitoring

Monitoring (Hands-free)

Monitoring (Handset)

No operation

Stop

monitoring

Answering

On-hook.

(Live Call
Screening)

(Alarm Tone)

Press 

SP-PHONE

 or 

MONITOR

.

Press 

Live Call 
Screening

.

Off-hook.

OR

Press 

Live Call

Screening

.

Press 

SP-PHONE, MONITOR

 or 

Live Call 

Screening

.

PT

(Live Call
 Screening)

(Live Call
 Screening)

Off-hook.

OR

Off-hook.

MONITOR

OR

OR

Press 

SP-PHONE

 

or 

MONITOR

.

MONITOR

OR

MONITOR

PT/PS

•

The Live Call Screening (LCS) button light shows the feature status as follows:

Off:

 LCS is off.

Flashing green rapidly:

 Alerting in the Private mode.

Flashing green slowly:

 Monitoring.

Red on:

 LCS is on.

•

The manager extension can clear an extension PIN.

•

This feature is available for a single line telephone if it is connected to a proprietary
telephone in parallel. (Private mode only)
To answer the call while monitoring, press Recall/hookswitch.

•

Only the handset monitoring in the Private mode is available for PS users.

1.8.6 Other Features

Operating Manual

167

Summary of Contents for KX-NS1000















































































































































































































































































































































































Reviews:

No comments