Panasonic KX-MB2060, Operating Instructions Manual

Page: 85 / 160

Feature/Code Selection
Activating the Distinctive
Ring feature
MBNM 4 NM 3 NM 0 N
M 0 N “
OFF
” (default)
M 1 N “
ON
”
See page 68 for details.
Setting the ring pattern for fax
(Distinctive Ring feature)
MBNM 4 NM 3 NM 1 N
M 1 N “
A
”
M 2 N “
B
”
M 3 N “
C
”
M 4 N “
D
”
M 5 N “
B-D
” (default)
See page 68 for details.
Setting auto reduction
feature
MBNM 4 NM 3 NM 2 N
To receive a fax document that is longer than your recording paper.
M 0 N “
OFF
” : Deactivates this feature.
M 1 N “
ON
” (default): The unit will fit received documents onto your recording
paper.
Changing the fax activation
code
MBNM 4 NM 3 NM 4 N
If you wish to use an extension telephone to receive faxes, activate this feature
and program the activation code.
M 0 N “
OFF
”
M 1 N “
ON
” (default)
1. M Menu N A MBNM 4 NM 3 NM 4 N
2. Press M 1 N to select “
ON
” . A M Set N
3. Enter your code from 2 to 4 digits, using 0-9, MGN and MBN .
R The default code is “ H
#9
” .
4. M Set N A M Menu N
Setting the memory reception
alert
MBNM 4 NM 3 NM 7 N
To alert you with a beeping sound when a received fax document is stored into
memory.
M 0 N “
OFF
” : Deactivates this feature.
M 1 N “
ON
” (default): You will hear a beeping sound.
Note:
R If documents are stored into memory due to some printing problem, the
beeps will continue until you solve the problem. If a message is displayed,
see page 110 to page 112 for directions on printing out the stored
documents. Make sure the unit is supplied with enough paper to print the
stored document.
R If documents are stored into memory due to activating the web fax preview
(feature #448 on page 66), the base unit will not beep. However, the base
unit will start to beep when the memory is nearly full.
Setting friendly reception
MBNM 4 NM 3 NM 8 N
To receive a fax automatically when you answer a call and hear a fax calling
tone (slow beep).
M 0 N “
OFF
” : You have to press M Start N , and then M 2 N for fax reception using the
base unit. You have to press M MENU N (soft key), select “
Fax Start
” , and then
M SELECT N (soft key) for fax reception using the cordless handset (KX-MB2060
optional).
M 1 N “
ON
” (default): You do not have to press M Start N , and then M 2 N for fax
reception using the base unit. You do not have to press M MENU N (soft key),
select “
Fax Start
” , and then M SELECT N (soft key) for fax reception using the
cordless handset (KX-MB2060 optional).
85
11. Programmable Features