Panasonic KX-MB2060 Operating Instructions Manual Download Page 130

Page: 130 / 160

Close the top cover by holding the indentations on
both sides of the base unit, until locked.

15.1.2 When the recording paper is not fed
into the unit properly

The display will show the following:
–

“

CHECK PAPER #1 PRESS START

”

Pull the paper input tray until it clicks into place, then
pull it completely out, lifting the front part of the tray.
Remove the recording paper and straighten.

Re-load the recording paper.

Insert the paper input tray into the base unit, lifting
the front part of the tray. Then push it completely into
the base unit.

Note:

If the message is still displayed, check the recording
paper specifications and load the recording paper
again. See page 16 for details.

15.1.3 When the recording paper in the
manual input tray is not fed into the unit
properly

The display will show the following.
–

“

CHECK PICK UP INPUT TRAY #2

”

Remove the recording paper.

Re-insert the recording paper.

130

15. Paper Jams

Summary of Contents for KX-MB2060

































































































































































Search results

Summary of Contents for KX-MB2060

Reviews:

Related manuals for KX-MB2060

Brands by name

Popular brands

Panasonic KX-MB2060, Operating Instructions Manual

Search results

Summary of Contents for KX-MB2060

Reviews:

Related manuals for KX-MB2060

Brands by name

Popular brands