Panasonic KX-MB2060, Operating Instructions Manual

Page: 74 / 160

10.9.2 Remote operation using remote
commands
1
Call your unit.
2
Enter the remote operation ID during or after the
TAM/FAX greeting message.
3
Enter a remote command within 10 seconds.
Note:
R When you press a key, press firmly.
Key Remote command
M 1 N Repeat message (during
playback)
*1
M 2 N Skip message (during playback)
M 4 N Play new messages
M 5 N Play all messages
M 6 N Play greeting message
M 7 N Record greeting message
M 9 N
Stop current operation
*2
M 0 N Turn OFF auto answer setting
MGNM 4 N Erase currently playing message
MGNM 5 N Erase all messages
MGNM 6 N Erase greeting message (during
greeting message playback)
*3
MGNMBN End remote operation
*1 If pressed within the first 5 seconds of a message,
the previous message is played.
*2 To resume operation, press a command key within
10 seconds.
*3 Unit resets to a pre-recorded greeting message.
Recording a marker message
After playing back the messages, you can leave an
additional message.
1. Wait for 3 beeps indicating the end of the remote
operation.
2. Wait about 10 seconds.
3. Hear the voice guide and/or hear 1 beep.
4. Leave a message.
To turn ON the auto answer setting
1.
Call your unit and let it ring 10 rings.
R A beep will sound.
2. Enter the remote operation ID (feature #306 on
page 76, 88) within 10 seconds.
R The receiving mode will be set to TAM/FAX or
FAX ONLY mode, depending on the setting of
feature #400 (page 81).
3. Hang up the handset.
Note:
R You cannot turn ON the auto answer setting when the
unit is set to TEL mode during the time periods set
for silent mode (page 50).
10.10 Using the answering
machine with the cordless
handset (KX-MB2060 optional)
The maximum recording time of your greeting message
is either 16 seconds (default) or 60 seconds.
Helpful hints:
R To activate TAM/FAX mode with the cordless
handset, see page 63.
Important:
R Only 1 person can access the answering machine
(listen to messages, record a greeting message,
etc.) at a time.
R When callers leave messages, the unit records
the day and time of each message. Make sure the
date and time have been set correctly (page 28).
MCNMDNMFNMEN
M C N
M OFF N
A
10.10.1 Recording your greeting message
1
M MENU N (soft key A ) A M # NM 3 NM 0 NM 2 N
2
“ Yes ” A M SELECT N (soft key A )
3
After a beep sounds, hold the cordless handset about
20 cm (8 inches) away and speak clearly into the
microphone (60 seconds max.).
4
Press M STOP N (soft key A ) to stop recording.
R The greeting message will be played.
5
M OFF N
To check the greeting message
1.
M MENU N (soft key A ) A M # NM 3 NM 0 NM 3 N
2. M OFF N
To reset to a pre-recorded greeting message
If you want to use a pre-recorded greeting message once
you record your own greeting message, you need to
erase your own greeting message.
1. M MENU N (soft key A ) A M # NM 3 NM 0 NM 4 N
2. M YES N (soft key A ) A M OFF N
74
10. Answering Machine