Panasonic KX-MB1500HX Operating Instructions Manual Download Page 77

Page: 77 / 88

Close the front cover.

11.1.2 When the recording paper is not fed
into the unit properly

The display will show the following:
–

“

CHECK PAPER #1 PRESS START

”

Pull the paper input tray completely out.

Re-load the recording paper.

Insert the paper input tray into the unit.

Note:

If the message is still displayed, check the recording
paper specifications and load the recording paper
again. See page 13 for details.

11.1.3 When the recording paper in the
manual input tray is not fed into the unit
properly

The display will show the following.
–

“

CHECK PICK UP INPUT TRAY #2

”

Remove the recording paper.

Re-insert the recording paper.

Note:

If the message is still displayed, check the recording
paper specifications and re-install recording paper.
See page 15 for details.

11. Paper Jams

Summary of Contents for KX-MB1500HX

























































































Search results

Summary of Contents for KX-MB1500HX

Reviews:

Related manuals for KX-MB1500HX

Brands by name

Popular brands

Panasonic KX-MB1500HX, Operating Instructions Manual

Search results

Summary of Contents for KX-MB1500HX

Reviews:

Related manuals for KX-MB1500HX

Brands by name

Popular brands